高烈度地震区隧道软硬围岩交接段刚柔并济抗减震技术研究*

为提高高烈度地震区隧道抗震性能，以某铁路隧道为研究背景，分析3种抗减震措施下隧道不同监测点隧道拱顶沉降、边墙收敛、衬砌结构PGA及最小安全系数，通过对比分析得到最优抗减震措施。结果表明:相比于工况1，工况2隧道拱顶沉降减小10.54%~81.10%，边墙收敛减小13.92%~78.77%，衬砌结构PGA减小31.42%~72.02%，最小安全系数增加18.04%~66.13%；相比于工况1，工况3结构拱顶沉降减小3.04%~18.02%，边墙收敛减小4.70%~32.00%，PGA增加13.95%~27.48%，最小安全系数增加7.49%~30.99%；工况4即“减震层+SFRC衬砌”刚柔并济法，相比于工况1，隧道拱顶沉降减小18.46%~83.98%，结构边墙收敛减小17.54%~85.47%，PGA减小30.00%~69.98%，最小安全系数增加47.95%~83.56%；4种工况抗减震性能由高到低依次为:工况4＞工况2＞工况3＞工况1。研究结果可为隧道软硬围岩交接段抗震设防提供理论参考。     

中国土壤环境监测方法现状、问题及建议

综述了目前中国现行的土壤环境监测国家标准方法和环保、农业、林业等行业标准方法,指出国家标准和环保行业标准方法侧重于土壤污染物的检测,而农业和林业标准方法侧重于土壤营养元素及其有效态、理化指标的检测。针对现行标准方法存在的一些问题(如检测的土壤污染物种类少、部分方法先进性不足、土壤环境监测的基础研究薄弱以及方法的标准化尚待完善等),提出加强土壤监测标准方法的顶层设计、合理增加土壤污染物的控制种类,及时更新方法、发展多组分测定方法,加强标准方法研究的系统性、协调性,以及逐步增加原位监测标准方法等建议,为土壤监测技术的发展提供借鉴和参考。     

基于Landsat 8遥感数据的天津市地表温度反演

以Landsat 8遥感数据为数据源,进行天津市地表温度反演研究。首先采用单通道算法反演地表温度,并利用均值标准差法进行温度分级。然后建立不同温度等级面积比例的估算模型。再通过随机样点,从不同温度等级和土地覆盖类型2个角度,分别建立并比较不同类样点的地表温度与各指数的拟合模型。结果表明:次高温区域面积比例与人口密度、人均GDP都具有较高的决定系数;地表温度与NDVI、BAEM的二元线性回归决定系数高于地表温度与单一指数的决定系数;将样点分类后,低温点与MNDBI的决定系数高于其他温度等级样点,水域和植被样点与各种指数的决定系数高于其他地物类型样点。     

模糊综合评价法在钢铁企业安全投资合理性评价中的应用

为了对钢铁企业安全投资进行模糊综合评价,建立了钢铁企业安全投资的评价体系,确定各因素的权重。得出模糊综合评价矩阵,可对各因素进行评价分析;得出某钢铁企业安全投资现状分数为83.9分,等级为较好,需着重加强安全培训、劳保品、工业卫生等人因素方面的投资;在环境方面的投资较合理。     

A climate-change vulnerability and adaptation assessment for Brazil's protected areas

Brazil hosts the largest expanse of tropical ecosystems within protected areas (PAs), which shelter biodiversity and support traditional human populations. We assessed the vulnerability to climate change of 993 terrestrial and coastal-marine Brazilian PAs by combining indicators of climatic-change hazard with indicators of PA resilience (size, native vegetation cover, and probability of climate-driven vegetation transition). This combination of indicators allows the identification of broad climate-change adaptation pathways. Seventeen PAs (20,611 km²) were highly vulnerable and located mainly in the Atlantic Forest (7 PAs), Cerrado (6), and the Amazon (4). Two hundred fifty-eight PAs (756,569 km²), located primarily in Amazonia, had a medium vulnerability. In the Amazon and western Cerrado, the projected severe climatic change and probability of climate-driven vegetation transition drove vulnerability up, despite the generally good conservation status of PAs. Over 80% of PAs of high or moderate vulnerability are managed by indigenous populations. Hence, besides the potential risks to biodiversity, the traditional knowledge and livelihoods of the people inhabiting these PAs may be threatened. In at least 870 PAs, primarily in the Atlantic Forest and Amazon, adaptation could happen with little or no intervention due to low climate-change hazard, high resilience status, or both. At least 20 PAs in the Atlantic Forest, Cerrado, and Amazonia should be targeted for stronger interventions (e.g., improvement of ecological connectivity), given their low resilience status. Despite being a first attempt to link vulnerability and adaptation in Brazilian PAs, we suggest that some of the PAs identified as highly or moderately vulnerable should be prioritized for testing potential adaptation strategies in the near future.     

Using culturomics and social media data to characterize wildlife consumption

Wildlife provides food, medicine, clothing, and other necessities for humans, but overexploitation can disrupt the sustainability of wildlife resources and severely threaten global biodiversity. Understanding the characteristics of consumer behavior is helpful for wildlife managers and policy makers, but the traditional survey methods are laborious and time-consuming. In contrast, culturomics may more efficiently identify the features of wildlife consumption. As a case study of the culturomics approach, we examined tiger bone wine consumption in China based on social media and Baidu search engine data. Tiger bone wine is one of the most purchased tiger products; its consumption is closely related to tiger poaching, which greatly threatens wild tiger survival. We searched a popular social media website for the term “tiger bone wine” and focused on posts that were originally created from 1 January 2012 to 31 December 2018. We filtered and classified posts related to the purchase, sale, or consumption of tiger bone wine and extracted information on providers, consumption motivations, year of production, and place of origin of the tiger bone wines based on the texts and photos of these posts. We found 756 posts related to tiger bone wine consumption, 113 of which mentioned providers of tiger bone wine, including friends (53%), elder relatives (37%), peer relatives (7%), and others (3%). Out of the 756 posts, 266 indicated the motivations of tiger bone wine consumption. Tiger bone wines were consumed as a tonic (34%), medicine (23%), game product (30%), and a symbol of wealth (28%). Some posts indicated ≥2 consumption motivations. These findings were consistent with the search queries from Baidu index. Such information could help develop targeted strategies for tiger conservation. The culturomics approach illustrated by our study is a rapid and cost-efficient way to characterize wildlife consumption.     

洪泽湖水体富营养化时空分布特征与影响因素分析

通过2014年—2017年对洪泽湖12个水质断面定期调查,采用营养状态指数(TLI)综合评价其水体富营养状态,同时应用主成分分析方法(PCA)分析其富营养化状态的时空变化特征。结果表明,洪泽湖70%以上的调查断面水质全年处于轻度富营养化状态,夏季是其富营养化最严重的季节;洪泽湖年内水体水质差异较大,而其水华特征并未呈现明显差异;洪泽湖富营养化很大程度上受制于营养盐的积累程度,并与湖泊透明度呈现极显著的负相关关系(p0.001),与湖水pH值呈现极显著的正相关关系。     

利用卫星遥感数据估算PM2.5浓度的应用研究进展

近年来,PM_(2.5)已成为中国大气污染的首要污染物,危害人体健康。为弥补地基监测站点在空间分布上的局限性,借助卫星遥感技术估算PM_(2.5)浓度已成为研究热点。文章总结了利用卫星估算PM_(2.5)浓度的各种研究方法,探讨了不同方法的优势和不足,指出不同方法对不同应用目的的选择性差异较大。提出,应针对不同应用目的选择相应的方法,从而取得满足各方面需求的研究成果,为未来PM_(2.5)浓度估算应用工作提供参考。     

太原汾河景区跨桥断面水体污染的时空变化模式研究

选取太原汾河景区跨桥断面8个监测点,在2012年3月—2013年10月期间对河流8项水质参数进行监测,并结合派生的水体综合污染指数及主成分分析方法分析和评价景区水污染时空变化特征。结果表明,景区水质污染变化时空差异明显,上游污染相对较小,下游污染较重;春季溶解氧和p H值变化幅度最大,夏季除总氮和氨氮外,其他各污染物均有显著变化特征,秋季则以氨氮、总氮和总磷变化最为显著。主成分分析结果显示,虽然各监测点水体污染的关键影响因子不同,但总磷是太原市河流水体污染的共同解释因子。     

The accounting method and application of CO2 emissions responsibility by the electricity sector at the provincial level in China

When accounting the CO₂ emissions responsibility of the electricity sector at the provincial level in China,it is of great significance to consider the scope of both producers’ and the consumers’ responsibility,since this will promote fairness in defining emission responsibility and enhance cooperation in emission reduction among provinces.This paper proposes a new method for calculating carbon emissions from the power sector at the provincial level based on the shared responsibility principle and taking into account interregional power exchange.This method can not only be used to account the emission responsibility shared by both the electricity production side and the consumption side,but it is also applicable for calculating the corresponding emission responsibility undertaken by those provinces with net electricity outflow and inflow.This method has been used to account for the carbon emissions responsibilities of the power sector at the provincial level in China since 2011.The empirical results indicate that compared with the production-based accounting method,the carbon emissions of major power-generation provinces in China calculated by the shared responsibility accounting method are reduced by at least 10%,but those of other power-consumption provinces are increased by 20% or more.Secondly,based on the principle of shared responsibility accounting,Inner Mongolia has the highest carbon emissions from the power sector while Hainan has the lowest.Thirdly,four provinces,including Inner Mongolia,Shanxi,Hubei and Anhui,have the highest carbon emissions from net electricity outflow- 14 million t in 2011,accounting for 74.42% of total carbon emissions from net electricity outflow in China.Six provinces,including Hebei,Beijing,Guangdong,Liaoning,Shandong,and Jiangsu,have the highest carbon emissions from net electricity inflow- 11 million t in 2011,accounting for 71.44% of total carbon emissions from net electricity inflow in China.Lastly,this paper has estimated the emission factors of electricity consumption at the provincial level,which can avoid repeated calculations when accounting the emission responsibility of power consumption terminals（e.g.construction,automobile manufacturing and other industries）.In addition,these emission factors can also be used to account the emission responsibilities of provincial power grids.